KUZMA STABI XL AIR Turntable

Code
£0.00
£52,000.00
Code
£0.00
£52,000.00
Save
Earn 0 reward points with this product.
  • Description

    KUZMA STABI XL AIR Turntable

    (Tonearm and Cartridge not included in price)

    Hi Fi LIVE STABI XL AIR REVIEW

    XL AIR turntable   differs from  Stabi XL DC turntable  by  using air bearing  and extra bronze platter having  total platter mass of 44 kg. Stabi XL DC can be converted into XL AIR version by using XL AIR kit. Current delivery time is 30-45 days.

    NOTE: From Jan 1st, 2020 we supply XL AIR with compressor model 50D which is big enough to supply air for XL AIR turntable and Air Line tangential tonearm.

    XL Air turntable is using air bearing compared coventional bearing which allows improvement in two important  paramethers in turntable design.
    Air bearing  have almost zero friction and thus no vibrations in bearing itself thus eliminating noise reaching cartridge.
    Second advantage with properly designed  air bearing ( not just simple floating on air chusion) is higher load.
    Total mass of  rotating platter is  44 kg making it more imune to cartridge drag which slows down any platter regardlessof mass and drive. The top  platter- same as in XL DC turntable ( 22 kg) is a sandwich construction of aluminium and acrylic plates screwed together in a  pre-stressed form to damp all unwanted vibration. Lower bronze platter ( 22kg) is cast and gives good damping properites.
    Air bearing requires for function compressed air which is supplied  from air supply.
    Air  supply consist of  compressor and air filters. See for details in this manual elsewhere.
    Turntable's air bering actually  consists from two  bearings surfaces. Top surface carries vertical load while cilyndrical hole carries horiontal load. Air bearing has a shaft of 31mm and trust plate of 60 mm. 
    Air bearing surfaces are made from porous carbon thus having milions of small holes to let air pressure  out. This creates more uniform pressure inside bearing's gap of 5 microns with 4bar pressure  thus making air bearing  stiffer with zero movements.
    The base holding air bearing  is made from two pieces  of solid brass which are clamped together having good damping properties.

    Technical Info:

    Technical data
    Mass (total w/o PS and compressor)120 kg
    Platter aluminium- top22 kg
    Bronze platter- lower22 kg
    Base27 kg
    Motor tower7,5 kg
    Tonearm tower14 kg ( No. 1)
    Air pressure4 bars
    Speeds33, 45, 78 rpm
    Dimension- turntable450x 400 x 300 mm
    Dimension-compressor180x410x430 mm
    Compressor mass20 kg - See NOTE above
    Power supply110V or 240 V, 50/60Hz (factory set)

    IDENTIFIEREXISTS: FALSE
    MPN: XL AIR

  • Reviews (0)

    Be the first to review this product.


    Leave your own review