Kuzma Stabi AC Power Supply/Speed Control.

Power Supply PS AC:

General description:

(Suitable for Stabi S, SD & S12)

The AC motor controller unit generates a dual sine wave output to control rotation and speed of two AC synchronous motors. The signal is generated by a sophisticated computer based program. This allows for smooth generation of the sine wave with very fine choice of speed. Each speed can be selected, finely adjusted independently and then stored in the memory.

The PS is factory preset. Connect the motor cable to the motor output. It may take few hours for a new turntable to settle at the correct speed. When the PS is unplugged, the preset speeds will be stored. PS (power supply ) connection: Position the PS in such a way, that it will be convenient for operation of the turntable. You should, however, allow space above for ventilation, of at least 10-20 mm. The cable which connects the motor controller unit and motor tower has a five pin DIN plugs on both ends, which should be inserted and locked into the connectors at the rear of the PS and motor tower. Connect the mains cable into the mains and then switch on the PS at the rear panel, which is left permanently on. A red light and green display will light up on the front panel.

IDENTIFIEREXISTS: FALSE