- Home
- GRAHAM SLEE Revelation Phono Stage
GRAHAM SLEE Revelation Phono Stage
- Description
Revelation M and C RIAA Equalizer Stages
Welcome to a new world of musical realism! The Revelation multi-equalisation format RIAA equalizer stages welcome you to that new world.
Available in moving magnet and moving coil versions, the Revelation M and Revelation C equalizer stages are the multi-format variants of the Reflex M and C phono stages — there is no difference except the additional record EQ switching.
They're a must for any serious record collector. It's quite amazing how they can make early LPs and 78 rpm records sound as tonally balanced and fresh as some of todays modern vinyl records.
Three 3-way switches provide a matrix of equalisation curves covering virtually all electric phonograph records ever released, including today's modern RIAA pressings.
Features
- The right equalisation easily selected on a matrix of three 3-way front panel switches
- Reflex flagship performance in RIAA mode
- Rear panel mono-sum selector switch (centre: stereo; up or down: mono)
- Fast-Active preamp and equalisation technology
- Latest innovative Ultra-Linear technique
- Inherent reduced vinyl click and pop characteristic
- Rock steady sound stage and truly 3D performance from modern vinyl
- Moving Magnet and Moving Coil sensitivity versions
Specification
Revelation M
- Input sensitivity range: 2mV to 10mV
- Output range (for above inputs): 224mV to 1120mV
- Maximum input: 46mV rms
- Maximum output: 5.2V rms
- Gain: 41dB (112) at 1kHz
- Input impedance: 47k Ohms plus 100pF (200pF approx. with arm cable capacitance)
- Output impedance (driving impedance): 1k Ohm (will drive 10k Ohms and above)
- Noise at output: -68dB CCIR Q-pk; EIN: -109dB
- Distortion: typically 0.01%
- RIAA accuracy: <0.3dB
- Frequency response: 20Hz - 200kHz ("flat", corrected to RIAA)
- Channel balance: 0.2dB
- Channel separation: 60dB
- Size: (approx.) W: 107 x H: 50 x D: 180 (mm) inc. jacks
Revelation C
- Input range: 0.2mV to 1.0mV
- Output (for input range): 252mV to 1,260mV (1.26V)
- Maximum input: 3.9mV rms
- Maximum output: 4.914V rms
- Gain: 62dB (1,260) at 1kHz
- Input impedance: 100 Ohms
- Output (driving/source) impedance: 1k Ohm
- Recommended load impedance: 10k Ohm or greater
- Noise at output: -62dB CCIR Q-pk
- Equivalent input noise (EIN): -124dB
- Distortion: 0.02%
- RIAA accuracy: <0.5dB
- Frequency response: 20Hz - 200kHz (flat, corrected to RIAA)
- Channel balance: 0.2dB
- Channel separation: 64dB
- Size: (approx.) W: 107 x H: 50 x D: 180 (mm) inc. jacks
Specifications subject to alteration without notice in keeping with our continuous improvement policy.
IDENTIFIEREXISTS: FALSE
- Reviews (0)
Be the first to review this product.
Leave your own review