Grado Timbre Platinum 3 Cartridge

Code 9719
£0.00
£399.00
Code 9719
£0.00
£399.00
Save
Earn 0 reward points with this product.
  • Description

    The first step-up from the Opus3, the Platinum3 puts Jarrah wood and a twin magnet system to work for your favorite music.

    The Platinum3 is a great example of what the Timbre Series is made for: to start listening to your music with more clarity and depth than youve heard before. 

    To make the Timbre Series work as a whole, we created a way for Jarrah, diamonds, and a twin magnet system to integrate with our Flux-Bridge. We modified our four piece OTL cantilever technology to achieve a 10% tip mass reduction over the Prestige Series and use ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils. The Platinum3 uses a specially Grado designed elliptical diamond.

    Grado has combined newly developed coil winding techniques with decades-old disciplines. A new two-step shielding process brings not only exact unison between the four coils but an unobstructed path for a cleaner signal. The music is allowed to travel undistorted through the coils, greatly reducing mechanical noise while improving tracking. There is an extreme clarity over the full frequency range, with absolutely no stridency or shrillness. Precisely hand tipped with a diamond, a great amount of care go into each cartridge we build.

    After the Platinum3 cartridge is crafted, it is then placed inside an Australian Jarrah housing. Jarrah is necessary for the majority of Timbre Series with its ability to produce surgically precise clarity without losing any depth. Through a variation of thermal aging processes, the housing gains the ability to better dampen and control the resonant frequencies. 

    Specification:

    • Body: Australian Jarrah Wood
    • Cantileaver: Aluminum / Elliptical Diamond
    • Output:
      High 4.0mV @5 CMV (45)
      Low  1.0mV @5 CMV (45) 
    • Inductance: 
      High Output 55mH
      Low Output  6mH
    • Resistance:
      High Output 660 ohms
      Low Output  70 ohms
    • Input Load: 10k-47k ohms
    • Cartridge Weight: 9 grams
    • Tracking Force: 1.6-1.9 grams
    • Compliance 20μm/mN
    • Channel Separation: Average 30db - 10-30k Hz
    • Controlled Frequency Response: 10-60 KHz
    • Non-Sensative to Capacitive Load
    • Builds: High Output, Low Output, Mono

    IDENTIFIEREXISTS: FALSE

  • Reviews (0)

    Be the first to review this product.


    Leave your own review